 |
2.1 TELESCOPIC SAMPLER
This equipment is designed to take liquid and viscous samples
from difficult to reach locations, using a telescopic / adjustable
telescopic rod, with snap connection, to suit the following items.
- Telescopic rods 4.5 metres.
- Pendulum Beakers (PP), 1000 and 2000ml.
- Angular Beakers (PP), 1000 and 2000ml.
- Stainless Steel Beaker 1500ml.
- Bottle Holder (PP) 500, 1000ml.
- Sediment Snapper 304 Stainless Steel.
- Swab Sampler. Adjustable clamp to hold a pad for checking
clean down efficiency on internal surfaces of mixing vessels
|
|
 |
2.2 PUMP SAMPLER
This hand operated device pumps the liquid from depths up to 5 meters directly into the 50ml or 150ml sample bottle.
The liquid is only in contact with tube and bottle (both polyethylene).
Special feature: Bottles are in a letter box format – only 30mm thick.
According to this operation, target and average samples can be withdrawn. The pump sampler can be used on different types of containers, tanks etc. for all media that are not aggressive to the material of tube and bottle (polyethylene). Depending on the specific weight of the media, different depths can be realized with water it is about 5 meters.
This device can also be used for polluted liquids and sediments. These are just sucked in.
The pump sampler can be used on all different types of containers, tanks etc. with an opening of at least 8mm. |
|
 |
2.3 DIP SAMPLER
Depending on the operation they can be used for sampling floating phases (e.g. oil) or explicit transition of phases. Please pay attention to the material of the sampler to be used on your individual liquid.
The following devices are available in three different materials:
- PTFE / FEP
- Stainless Steel (AISI 316L)
Dip samplers can be used in all kinds of liquids according to their material resistance.
The containers must have an opening of at least 35mm to insert the sampler. |
|
 |
2.4 VISCOUS SAMPLER
Samplers for target and average samplers in viscous media. These samplers are ideal for sampling viscous media using a vacuum. Designed for target and average sampling.
For target sampling: The sampler is lowered to the desired depth and the sample is sucked in by pulling the lever.
For average sampling: In the same way the sampler is lowered into the media and the lever is pulled. A representative sample is sucked into the sampler.
Applications: Viscous samplers are suitable, based in their chemical resistance, for all kinds of viscous media that do not have a sufficient flow behaviour, e.g. resins, paints, greases, creams, jellies, mud, etc. The containers must have an opening of at least 35mm for entering the sampler. The Mini Visco sampler requires and opening of min. 15mm. |
|
 |
2.5 SLOT SAMPLER
For target, multi layer, and average sampling.
Two turn able tubes can be twisted to open and close the collecting chambers.
The zone sampler is inserted in closed condition into the bulk. By turning the inner tube the chambers are opened and the sample is collected.
These samplers allow simultaneous sampling of different depths from the bulk material. Pocket or zone samplers may be used either vertically or horizontally.
Generally zone samplers are suitable for all kinds of bulk that are within the specification regarding particle size and flow behaviour. They can be used horizontally as well as vertically in a wide range of containers. |
|
 |
2.6 SILO SAMPLER
Heavy duty non-jamming screw sampler.
The silo sampler is suitable for sampling any kind of bulk material in silos and silo trucks. Its’ special design allows to screw the closed probe into the bulk up to a depth of 2-3 meters even when the bulk material is condensed. At the target depth the handle can easily pushed up to open the chamber. As the moving parts are away from the material the chances of malfunction is minimized. The capacity is approximately 800ml. Suitable for all materials with a particle size up to 25mm. Special lengths on request. |
|
 |
2.7 UNIT DOSE SAMPLER
A popular sampler in the pharmaceutical industry for taking a small volume (UDS) cohesive powder sample. This sampling technique is to reduce the effect of separation.
Samle chamber options, 0.25, 0.50, 0.75, 1.00ml. |
|
 |
2.8 LANCE
Lances for bulk in sack, big bags etc. |
|
 |
2.9 CLOSE 'N' SEAL
For marking closure sealing and labeling.
Because of the good adhesive ability these seals hold almost everywhere, even on dirty, moist or uneven surfaces. The vapor barrier from aluminum reliably prevents the penetration of humidity.
- Ultra strong caoutchouc-based adhesive
- 6 colours available
- Two different sizes (95x95mm and 150x150mm)
|
|
Click here for more information on Kersting Disposable Sampling Tools
Click here to send us an inquiry form |
Brochure
